Stained Glass Scoring And Breaking
Scoring and breaking stained glass is an art that you can achieve but not without some practice. All it takes is a little patience and you will soon be able to cut and break stained glass like a pro! The first thing to do when cutting stained glass is to relax when you are handling stained glass. It will make the work go much more smoothly.
Having the proper stained glass cutter is important. Various companies manufacture different types of stained glass cutters. They have cutting wheels of either carbide or steel. The wheel size and honing angles vary for use in specific types of glass cutting.
If you want the proper cutter for stained glass, it is best to go to a stained glass supplier. Cutters in hardware stores are generally made specifically for cutting clear glass.
Carbide wheels cost more but last longer than steel wheels. They will eventually get dull or even nicked and have to be replaced; but, you can replace the wheel only and not have to get a whole new cutter.
Stained glass cutters need to be lubricated to keep the wheels rolling freely. Most stained glass cutters, like Toyo or Fletcher pistol grip and pencil grip cutters, have a reservoir for lubricating oil which runs down a wick to the cutting wheel.
Stained glass cutters come with different handles which make the choice one of preference and fit. Once you have chosen your favorite cutters, it is best not to let other people use your cutter. They will put pressure on it differently than you which changes the balance.
Pencil grip stained glass cutters have a ball on one end which is used to tap the stained glass underneath the score line to begin a running break so that the glass can be pulled apart. Stained glass that has been scored can be pulled apart by hand; but sometimes, the glass pieces are too small to grip. Glass pliers can be used to separate the pieces that are too small to grasp.
Special "running" pliers are made for breaking straight lines. Some glass pliers have smooth gripping surfaces. Others have teeth for scraping off rough edges or shards of stained glass. Gripping one side of the glass firmly with your thumb along one side of the score gives the glass some stability. The breakers are used on the opposite side, pointing toward the score. You use a quick pulling away and down motion.
If your score is long, it is better to "rock" your pliers at one end to start a running break; then do the same at the opposite end of the score, then pull the stained glass apart.
A good score is done in one continuous motion. Starts and stops will only cause a bad score line which will end up in a bad break. Going over a score line twice dulls your stained glass cutter and makes a bad score line.
Stand up when scoring stained glass so that you can apply even pressure using the weight of your arm and leave your wrist free to follow curves. A metal ruler can be used to assist in cutting straight lines.
Be sure to hold the stained glass cutter straight up and down. If your cutter is leaning to one side, it results in a beveled cut, causing the stained glass pieces to fit poorly. Make sure you glass is clean before you cut it so that nothing interferes with a smooth score. Cut on the smooth side of the stained glass.
More Articles
The Cost Of A Custom Stained Glass Window
What You Need To Know To Buy Stained Glass
Installing A Stained Glass Window
How To Properly Solder Your Stained Glass
Stained Glass Art For Your Garden
Stained Glass Workshop Safety Tips
Beginning Stained Glass Class And What You Should Expect To Learn
Products And Downloads
Free Videos
More Articles And News
... design. Follow the manufacturer's directions for sandblasting (if you are renting the equipment, otherwise drop it off to the studio and wait for the dramatic results). Carefully peal off the transparent resist and viola, a beautiful piece of stained glass art! You are now ready to use stained glass paint ...
... Obviously you will need paint and paintbrushes, if you cannot afford the specialized stained glass type you may be able to improvise with regular artist's paintbrushes. You will also need access to a kiln to set your work. Many professional studios will allow you to use their kiln for an hourly rate. ...
Light Is The Inspiration For Stained Glass Windows
... Heavens in worship of God and His son were crowned with beautiful jewels known as stained glass. In some Cathedrals, stained glass panels covered entire walls and the supporting pillars go almost entirely unnoticed. The pillars alone could not have supported the weight of the structure, which is the purpose ...
Stained Glass Copper Foil Technique
... lead; you would want copper backed foil on your stained glass. Black-backed foil would look best on that clear glass if you are using black patina. Copper foil tape is a "dead soft copper" which, when burnished onto the stained glass, sticks closely to the glass. It comes in various widths with popular ...
Stained Glass Art For Your Garden
... plastic ones you see under everyone's gutter drains. Picture beautiful stained glass and beveled or prism glass wind chimes flashing brilliant colors. The sound of the stained glass shapes bouncing off each other is pleasing when they are moved by a gentle breeze. Iron garden stakes frame colorful stained ...
 BBC News | Russia returns stained glass to German church The Associated Press - FRANKFURT AN DER ODER, Germany (AP) — Six medieval stained-glass windowpanes looted by the Red Army during World War II were returned to a German church ... In pictures: German stained glass Russia returns stained glass windows to Germany Spoils of war return home |
New Dunsmuir Mercantile restores historic building Mount Shasta Herald, CA - “I’m an antique collector and stained glass crafter. I was looking for a place to enjoy fishing, working with stained glass. Now I am embarking on the first ... |
Glassware and More at Pearl River Glass Studio show Jackson Clarion Ledger, MS - Church windows and architectural glass are the studio's standby, but new branches can reach new markets. "Not everybody can afford to buy a stained glass ... |
Russia Returns Stained Glass Windows to Frankfurt Church Deutsche Welle, Germany - Russia has returned six medieval stained glass window panes looted by the Soviet Red Army in 1945 to a church in Frankfurt an der Oder, on the Polish border ... |
Hemet area church picking up pieces after vandalism Press-Enterprise, CA - Greg Hepner, was preparing for a service when he discovered a brick had been thrown through the church's 100-year-old stained-glass window. ... |
Stained glass windows returned The Gazette (Montreal), Canada - Six stained-glass window panes missing since World War II returned home to a church in the eastern German town of Frankfurt an der Oder, 67 years after they ... |
 MLive.com | Hackley Public Library to celebrate stained-glass restoration MLive.com, MI - They work for Stained Glass By Shenandoah Inc. of Front Royal, Virginia. MUSKEGON — Now that the stained-glass windows at Hackley Public Library have been ... |
 Union of Catholic Asian News | CHINA Pioneering Course Aims To Inculturate Christian Art In China ... Union of Catholic Asian News, Asia - They are learning the principles and practical skills of silk-screen printing, stained glass production and bookbinding from German Divine Word Brother ... |
Backward Glances for Nov. 20 Hudson Sun, MA - Contract to install new stained glass windows in the downstairs Chapel of Our Blessed Mother in St. Michael’s Church was awarded to Colonial Stained and ... |
Our Lady of the Fields, No. 4 Journal of American Medical Association (subscription), IL - At age 14, he was apprenticed to an artisan who made and restored stained glass windows, and this experience was probably the first major influence on his ... |